Categories

Used Mannequins

Mannequin Rentals


Mannequin Accessories

Grid / List View:
Show:
Sort By:
$19.99
Product ID: MN-SH
Size: 8" H x 6" W x 7" D
Head Circumference 20.5"
This is a replacement plastic female head for MN-234, MN-235, MN-237, and MN-250.
New Item
$19.99
Product ID: MN-406HEAD
Size: 7.5" H (excluding screw) x 6.25" W x 8.5" D
Head Circumference 22-7/8"
This is a replacement fiberglass male head for MN-406 (Soft Flexible Male Body Form with Realistic Face). It can also fit on the MN-407 body (Soft Flexible Male Body Form with Egg Head). Has a threaded screw on the bottom to attach to the neck of the flex foam body. Face is hand painted.
New Item
$19.99
Product ID: MN-G2
Size: 8.5" H (excluding knob) x 6.75" W x 8.25" D
Head Circumference 22.5"
This is a replacement plastic male head for MN-251A. It can also be used on MN-247 and MN-249. Has a knob on the bottom to attach to the neck of the body.
New Item
$19.99
Product ID: MN-EHM
Size: 8.5" H (excluding knob) x 6.5" W x 7.75" D
Head Circumference 22"
This is a replacement plastic male head for MN-251, MN-247, and MN-249. Has a knob on the bottom to attach to the neck of the body.
New Item
$19.99
Product ID: MA-008
Size: 13.75" x 13.75" Base, 0.5" D Rod
Heavy square brushed metal base is made for the regular full size adult mannequins. Also includes a sole rod and a calf rod attachment that inserts over the sole rod.

This is not a universal base and may not fit your mannequin. The sole rod will fit any mannequin that has a hole on the bottom of the foot with an opening that is wider than the rod. The calf rod will fit 90% of mannequins manufacturers overseas but is not guaranteed to fit your mannequin's calf opening. Please make sure your mannequin has a base opening wide enough to fit the rod.

$10.00
Product ID: MN-HandsM
Size: 8" to 9" L (Measured from the back of hand, along the curve from fingertip to end of the wrist)
These are a surplus of male mannequin left and right hands. They come in assorted poses, styles, and finishes.

Connector type is keyhole type where you insert and twist.

Hand sizes can be subjective to each person, e.g.: some people have small hands and will deem these hands the right size while some people have very large hands and will deem the hand small relative to their own hand's size. Hand is 8" to 9" L (Measured from the back of hand, along the curve from fingertip to end of the wrist). The item itself not accounting for the curve is approximately 7.5-8.5" L.

$15.99
Product ID: MA-013
Size: 14" D Base, 6" L x 0.5" D Rod
This heavy round brushed metal base is made for the regular full size fiberglass mannequins. A sole rod is included with this base.

This is not a universal base and may not fit your mannequin. The sole rod will fit any mannequin that has a hole on the bottom of the foot with an opening that is wider than the rod. Please make sure your mannequin has a base opening wide enough to fit the rod.

$39.50
Product ID: PMP-801J
Size: Approx 6-8 months
Convert your dress form or mannequin to a pregnant form instantly! Attaches to most standard dress forms, torso body forms, and mannequins. Mannequin/form not included.
$5.99
Product ID: MA-021
Size: 4" x 3.5"
A set of metal slide-in flange connector that can be used to connect a mannequin arm to a shoulder. This is for the hardware only.

The male plate on the left is attached to the arm and the female plate on the right is attached to the shoulder.

$4.99
Product ID: MA-020
Size: 1.5" D
A set of metal flange connector that can be used to connect a mannequin hand to an arm. This is for the hardware only.

Connector type is insert, twist, and lock.

$70.00
$63.00
Product ID: PMP-606A
Size: Sizes: 2, 4, 6, 8, 10, 12, 14
100% linen cloth covered ladies right arm can be added onto any armless dress form or mannequin that has a metal disc at the shoulder joint. Arm has a strong magnet that can attach to the metal disc for a secure fit.

This arm add-on is compatible with any of our PMP series dress forms and most of our mannequins. Dress form not included.

Sizes and Measurements

$70.00
$63.00
Product ID: PMP-606B
Size: Sizes: 2, 4, 6, 8, 10, 12, 14
100% linen cloth covered ladies left arm can be added onto any armless dress form or mannequin that has a metal disc at the shoulder joint. Arm has a strong magnet that can attach to the metal disc for a secure fit.

This arm add-on is compatible with any of our PMP series dress forms and most of our mannequins. Dress form not included.

Sizes and Measurements

$6.99
Product ID: MA-028
Size: 5 3/4" Diameter
Two piece set plastic circular torso connector is made to hold the mannequin's upper and lower torso together. This is NOT a universal connector and might not fit with every model.
$34.90
Product ID: AF-109
Size: Approx 6-8 months
Convert your dress form or mannequin to a pregnant form instantly! Attaches to most standard dress forms, torso body forms, and mannequins. Mannequin/form not included.
$9.99
$4.99
Product ID: MN-GPM2
Size: 15" L x 7.75" W
Made of thick padded felt that can absorb shock when dropped, this bag will protect your mannequin when transporting them or keeping them in storage. Has a Velcro flap opening. We recommend using one bag per mannequin part to prevent the parts from scratching up against each other during transport.

Price is for one bag only.

$44.99
$31.50
Product ID: MA-030
Size: 18.25" H x 10.5" W
Cylindrical block pedestal for sitting mannequins. Is 18.25" high. Made of fiberglass.

$13.99
$6.99
Product ID: MN-GPM1
Size: 27" L x 10.5" W
Made of thick padded felt that can absorb shock when dropped, this bag will protect your mannequin when transporting them or keeping them in storage. Has a Velcro flap opening. We recommend using one bag per mannequin part to prevent the parts from scratching up against each other during transport.

Price is for one bag only.

$9.00
Product ID: MN-HandsF
Size: 8" to 9" L (Measured from the back of hand, along the curve from fingertip to end of the wrist)
These are a surplus of female mannequin left and right hands. They come in assorted poses, styles, and finishes.

Connector type is keyhole type where you insert and twist.

Hand sizes can be subjective to each person, e.g.: some people have small hands and will deem these hands the right size while some people have very large hands and will deem the hand small relative to their own hand's size. Hand is 8" to 9" L (Measured from the back of hand, along the curve from fingertip to end of the wrist). The item itself not accounting for the curve is approximately 7-8" L.

$15.99
Product ID: MA-026
Size: 16.75" x 12" Base, 11" L x 0.4" D (1 cm) Rod
Rectangular glass base is made for our full size plastic mannequins. Comes with the calf rod only. Rod has dimensions 0.4" (1 cm) across.

This is not a universal base and may not fit your mannequin. The calf rod will fit 90% of mannequins manufacturers overseas but is not guaranteed to fit your mannequin's calf opening. Please make sure your mannequin has a base opening wide enough to fit the rod.

$18.49
Product ID: MA-008SOLE-ROD
Size: 13.75" x 13.75" Base, 6" H x 0.5" D Rod
Heavy square brushed metal base is made for the regular full size adult mannequins. Includes a sole rod only that inserts up the bottom of the foot. Does not include a calf rod.

This is not a universal base and may not fit your mannequin. The sole rod will fit any mannequin that has a hole on the bottom of the foot with an opening that is wider than the rod. Please make sure your mannequin has a base opening wide enough to fit the rod.